iHome iW3 air series User Manual page 9

Wi-Fi Network Setup continued...
Option B - Manually connecting & managing settings with the iHome Set app
If you have an iPod touch, iPhone, or iPad with iOS 4.0 or later, we
recommend that you use our free iHome Set app to easily rename
your iW3 speaker and configure network settings.
To connect your iW3 speaker to a Wi-Fi network using iHome Set,
follow these steps:
1. Connect AC power and power ON the iW3 speaker.
2. Connect your iOS device to the iW3 using the included iPod
USB sync cable.
3. Download our free iHome Set
and launch the app.
4. Scroll down the app interface and select the 'Network' tab
interface and then select 'Manual Setup' button.
5. Select your preferred Wi-Fi network from the list of available
networks and enter password if prompted. Select 'Other
Network' to connect to network with a hidden SSID.
Note: Connecting to a network may take up to 120 seconds. If
network connection is unsuccessful, reset the unit or disconnect
your iOS device and reconnect and repeat the above steps.
6. OPTIONAL: To rename your iW3 speaker, exit manual network
setup, select 'Speaker Name' and customize how your iW3
speaker will present itself on your network. Press 'DONE' to
confirm the new name.
Success!
Congratulations, you have successfully connected your iW3 to your
wireless network and now you can start enjoying wireless audio
anywhere in your home or office. Verify that the Network Status
LED is green and then keep reading to learn how to use iW3 to
stream your iTunes and iOS audio content using AirPlay.
network setup
status
power network setup
off | on
Connected
Note: Your AirPlay source devices (Mac or PC with your iTunes
library as well as your iPod touch, iPhone or iPad) must be
connected to the same Wi-Fi network that the iW3 speaker is
connected before using AirPlay wireless streaming.
English
app from the App Store
network setup
status
power network setup
off | on
Not Connected
1
2
iHome Set
4
10:09 PM
iW3
About
Network Refresh
Wi-Fi
Show Details
Speaker Name
Name iHome iW3 XXXXXX
Note: it can take up to 3 minutes for your
AirPlay speaker to connect to the Wi-Fi
Firmware Update
speaker will turn solid green when it has
Search for Update
Model: iHome iW3 • Firmware: 8.0.0
Choose your Wi-Fi network from the available networks
6
10:09 PM
Network
Wi-Fi
Show Details
Speaker Name
Name iHome iW3 XXXXXX
Firmware Update
Search for Update
Model: iHome iW3 • Firmware: 8.0.0
Problem?
Reset the iW3 Speaker:
- Unplug the AC cable/remove the iW3 from the charging base
- Slide the rear Power Switch to the OFF and then ON position
- Reconnect AC cable, place iW3 on charging base and wait 30
seconds
- Repeat iW3 Wi-Fi Network Setup process if necessary
- See Troubleshooting on page 12-13 for other tips.
power power network setup network setup
off | on
power
off | on
power p power network setup network setup k p
off | on off | on
5
10:09 PM
Networks
iW3 Settings
Manual Setup
Choose a Network for iW3
Quick Wi-Fi Setup Instructions
Step1: Press the "Network Setup"
Your Wi-Fi Network
button on the rear panel of your
AirPlay speaker.
Other Wi-Fi Network
Step 2: When prompted, press
Other Wi-Fi Network
"Allow" to share your Wi-Fi settings
Other Wi-Fi Network
network you just shared. The "Network
Other Wi-Fi Network
Status" LED on the rear panel of your
successfully established a connection.
Other network
30s
and wait as the iW3 attempts to connect.
10:09 PM
Change Device Name
About iW3
Refresh
Livingroom Speaker
This name will be displayed when selecting your
speaker from a list of available AirPlay devices.
Q W E R T Y U I O P
A S D F G H J K L
Z X C V B N M
?123 space
10:09 PM
Wi-Fi Networks
Done
9