Getting Started - iHome iW3 air series User Manual

Getting Started

Master Power Switch
The iW3 has a master power switch that is used to power the unit ON or OFF, help conserve battery life, and reset the iW3 speaker. In order
for the iW3 speaker to power ON, the battery must be charged or placed on the charging base connected to an AC outlet.
Master Power ON - Slide the Master Power Switch
Master Power OFF - Slide the Master Power Switch
Note: If the iW3 is in the Master Power OFF state the iW3 will only allow charging of the iW3's internal battery and will not support
iPod/iPhone charging, AirPlay, network setup, nor firmware updates.
Powering your iW3 speaker ON
To power the iW3 speaker ON:
1. Plug AC adaptor into Charging
2. Place the iW3 Speaker on top of the
3. Slide the Master Power Switch
Note: Allow 30 seconds for the speaker to startup before interacting with the iW3 speaker.
4. Press the Power button to switch between power ON and Standby mode.
The iW3 speaker will power ON to the previous mode (default is AirPlay mode).
1
outlet
12V
Rechargeable Battery
The iW3 speaker has an internal rechargeable battery and supports audio playback anywhere in the home when the battery is charged.
To Charge the Battery:
1. Plug AC adaptor into Charging
2. Place iW3 Speaker on top of
Note: Allow up to 10 hours to fully charge the iW3's battery
Resetting your iW3 speaker
It is possible for the iW3 speaker to lockup and be unresponsive, making it necessary to reset the unit.
To reset the iW3 speaker:
1. Remove the iW3 Speaker from the
2. Using a paper clip, press the
The iW3 will reboot and power ON again.
English
(on rear panel) to the ON position to activate your iW3 speaker.
to the OFF position to power the iW3 speaker OFF.
Base, and plug into a live AC wall outlet.
Charging Base.
(on rear panel) to the ON position.
2
Base, and plug into a live AC wall outlet.
Charging Base.
Charging Base.
Reset Button on the bottom of cabinet within the charging base recess.
power
off | on
3
power network setup
off | on
power
off | on
30s for startup
Reset button
Reset the iW3 speaker by using a
paper clip to press the reset button
6