Installation (3) - Husqvarna Automower solar hybrid Operator's Manual

6.5 Installation (3)

From this option in the main menu you access the
driving settings.
• Exit angles (3-1)
to set how far Automower
the charging station before it turns and in what
direction the mower should leave the charging
station.
• Follow loop (3-2)
to guide the mower to easily reach a remote area
of the garden, to make it easier to find the
charging station and to determine at what
distance the mower shall follow the loop.
• Installation shape (3-3)
to tell Automower
• Advanced (3-4)
to check that the loop is intact or exactly where in
the lawn the wire is buried and to adjust the
distance over the boundary wire that Automower
shall run.
For examples of Installation settings, see 7. Garden
example on page 59.
Exit angles (3-1)
Normally Automower
direction within the exit sector 90°-270°, where 90° is
called the Start angle and 270° is called the End
angle. By setting the start and end angles, you can
set the direction in which Automower
charging station.
• Reversing distance (3-1-1)
Specify the number of centimetres you want
Automower to reverse before it turns to drive out
®
of the charging station.
The default reversing distance is 60 cm.
• Start angle 1 (3-1-2)
Specify in degrees where you want the
sector/sector 1 to start.
• End angle 1 (3-1-3)
Specify in degrees where you want the
sector/sector 1 to end.
48 - English
6. MENU FUNCTIONS
should reverse out of
®
which type of garden you have.
®
leaves the charging station in a
®
® is to leave the
Commands
Timer
Installation
Settings
3
®
Exit angles
Follow loop
Installation shape
Advanced
3-1
Exit angles
Follow loop
Installation shape
Advanced
3-
Reversing dist.
Start angle 1
End angle 1
3-1-