Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Hunter 24' ECO
Summarization of Contents
Safety & Precautions
General Safety Guidelines
Key safety instructions to prevent injury, death, and property damage, including warnings.
Installation Safety Requirements
Ensuring safe installation with proper weight support, PPE, and handling of damaged equipment.
Operational Safety and Service
Guidelines for safe operation, equipment checks, and contacting technical support.
Fan Placement
General Mounting Height and Clearance
Specifies minimum blade-to-floor and blade-to-ceiling clearances for optimal fan performance.
Placement Restrictions and Considerations
Guidelines on avoiding sprinklers, walkways, air discharge, wind, and wet locations.
Fan Spacing Guidelines
Provides charts for determining optimal spacing between adjacent HVLS fans.
Installation
Step 1: Mounting
Detailed instructions for securely mounting the fan bracket and downrod to the building structure.
Mounting Configuration Options
Details on channel height, material thickness, and maximum span length for mounting.
Step 2: Retention System Installation
Instructions for installing the retention cable to secure the fan to the building structure.
Step 3: Motor Assembly
Procedure for connecting the motor to the downrod and securing cables.
Step 4: VFD Control Panel Setup
Guidance on mounting and connecting the VFD control panel for the fan.
Step 5: Guy Wire Installation (Titan & Eco)
Instructions for installing guy wires on Titan and Eco fan models.
Step 6: Blade Installation (ECO & XP)
Procedure for attaching ECO and XP fan blades to the blade holder.
Step 6: Blade Installation (Titan)
Procedure for attaching Titan fan blades to the hub and tightening set screws.
Reference
Titan Electrical Specifications
Electrical plug requirements and amp draw for Titan fan models.
Eco Electrical Specifications
Electrical plug requirements and maximum amp draw for Eco fan models.
XP Electrical Specifications
Electrical plug requirements and breaker size chart for XP fan models.
Fan Network Configurations
Diagrams and instructions for daisy-chaining fans using the HMI controller.
Fire Panel Wiring
Wiring instructions for connecting the fire panel to the VFD enclosure for fire safety.
Maintenance
Blade Cleaning
Recommended procedures and solutions for cleaning fan blades.
Retention System Check
Annual inspection guidelines for the retention cable's attachment and condition.
Replacement Parts
Information on how to order replacement parts for the fan.
Service Procedure
Procedure for contacting the technical department if the fan malfunctions.
Troubleshooting
Fan Will Not Start
Troubleshooting steps for when the fan fails to start.
Motor High Amps
Diagnosing and resolving issues with the motor drawing excessive amperage.
Fan Swinging Motion
Addressing problems where the fan exhibits unstable swinging motion during operation.
Sagging Fan Blade
Troubleshooting steps for a fan blade that appears to be sagging or drooping.
Need help?
Do you have a question about the 24' ECO and is the answer not in the manual?
Questions and answers