H Ow To R Ead - Out F Requency - Ritron JOBCOM J Series User Manual

How To Read-Out Frequency and Tone Code Settings
This step allows you to read-out on a per-channel-basis what the frequency code and interference eliminator tone code settings are in your
radio.
With radio ON, select the channel # you want to read-out.
Step 1.
Turn radio OFF,
Step 2.
Step 3. HOLD the
Note: Continue to HOLD
Display will read for 3 seconds = [CH _ _ F _ _ ] then ....
Step 4. Radio will then display [READY] and return to normal operation.
Step 5. To read-out a different channel repeat steps 1-4 for each channel.
Step 6. Turn radio OFF then ON again to return to normal operation.
Note: If no Tone Code is programmed, the display will read: [ T 4 4 2T X ] 44 = No Tone
* If no 2-Tone Code is programmed, display will read: [ 2T X ]. 2-Tone feature not available in all J Series models.
button and Turn radio ON.
button until the following appears on the display:
Ch #
Have questions? Call 800-USA-1-USA (800-872-1872) or visit our website at www.ritron.com
Frequency
Code #
Tone 2-Tone*
Code # Code #
[T _ _ _ 2T _ ]
13