Motor Angle Adjustment - Honda BF2A Owner's Manual

INSTALLATION
MOTOR ANGLE ADJUSTMENT
If the propeller shaft is not parallel
with the water surface, adjust by
changing the transom angle adjust-
ing bolt position.
There are four adjusting stages.
1. Loosen the wing nut to free the
adjusting bolt.
2. Adjust the angle of the motor,
and tighten the wing nut. Be sure
that the bolt head and wing nut
are seated in one of the four
recesses on the adjustment slot.
To prevent damage to the motor or
boat, make sure the transom angle
adjusting bolt is locked.
19