Motor Angle Adjustment - Honda BF5A Owner's Manual

INSTALLATION
MOTOR ANGLE ADJUSTMENT
If the propeller shaft is not parallel
with the water surface, adjust by
changing the transom angle adjust-
ing rod position.
There are four adjustment positions.
1.
2.
Push in (A) the adjusting rod,
twist upwards (B) and pull out to
remove.
Inserting the rod in the proper
hole, twist it down to lock.
1 NOTICE 1
To prevent damage to the motor or
boat, make sure the transom angle
adjusting rod is locked.
TRANSdM ANGLE
ADJUSTING ROD
TO CHANGE
UNLOCKED
POSITION
TO LOCK
LOCKED POSITION
21