Engine Oil Change - Honda BF2A Owner's Manual

SERVICING YOUR HONDA OUTBOARD MOTOR
ENGINE OIL CHANGE
Drain the used oil while the engine is warm. Warm oil drains quickly and
completely.
1. Move the fuel valve lever to the OFF position, and turn the fuel vent knob
clockwise to the CLOSE position.
2. Remove the oil filler cap, and turn the motor on its side to drain the oil.
Improper disposal of engine oil can be harmful to the environment. If you
change your own oil, please dispose of the used oil properly. Put it in a
sealed container, and take it to a recycling center. Do not discard it in a trash
bin or dump it on the ground.
3. Stand the outboard motor in a vertical position, fill to the upper limit mark
on the dipstick with the recommended oil (p. 43).
Engine oil capacity: 0.42 US qt (0.40 Q, 0.35 Imp qt)
4. Install the oil filler cap and tighten it securely.
OIL FILLER CAP
UPPER LIMIT
LOWER LIMIT
DlP!illCK
I
OIL FlLiER CAP