Anode Replacement - Honda Marine BF25D Owner's Manual

SERVICING YOUR OUTBOARD MOTOR
Fuel Tank Filter
TANK FILTER JOINT
(Fuel Connector)
1. Unscrew the fuel hose connector
by turning it counterclockwise,
then remove the fuel hose
connector and fuel filter from the
tank.
2. Clean the filter in nonflammable
solvent. Inspect the fuel tank filter
and the connector O-ring. Replace
them if damaged.
3. Reinstall the filter and hose
connector in the fuel tank. Tighten
the hose connector securely.
82

Anode Replacement

FILTER
LEFT STERN BRACKET
ANODE
(SHG, LHT, SRG, LRG, SRT and
LRT types only)
The anodes are located on the trim
tab and the stern bracket. They are
made of a sacrificial material that
helps to protect the outboard motor
from corrosion.
Replace the anodes when they have
been reduced to about half their
original size, or if they are crumbling.
Painting or coating the anodes will
ANODE
def eat their purpose and will lead to
(trim tab)
rust and corrosion damage to the
outboard motor. The anodes must be
exposed to the water in order to
protect the outboard motor.