60°
12°
16°
0°
(VERTICAL LINE)
(when transom angle is 12°)
If your outboard motor is equipped
with the tilt limit mechanism
(optional equipment f or remote
control type), you can set the tilt
angle limit. Contact your dealer f or
more inf ormation.
Power Tilt Switch (engine pan)
TRIM
ANGLE
4°
POWER TILT SWITCH
The power tilt switch is located on
the engine pan. It is a rocker switch
with UP and DN (down) positions
for changing the angle of the
outboard motor.
The power tilt switch will operate
without turning the ignition switch
ON.
This switch is used with the engine
stopped to raise the outboard motor
for mooring, trailering, or
maintenance.
CONTROLS AND FEATURES
The power trim/tilt switch located on
the outboard (engine pan) is not
limited by the tilt limit mechanism
(optional equipment f or remote
control types) and will provide f ull
range of movement.
31