Calibration Menu - HANNspree LT32 Instruction

Calibration Menu

PC settings (VGA mode
H-Position: Change the picture's horizontal position. Value -16~+16 can be selected.
The defaulted setting is 0.
V-Position: Change the picture's horizontal position. Value -8~+8 can be selected.
The defaulted setting is 0
Phase: Adjust the A/D sample phase Range. Value 0~32 can be selected. The
defaulted setting is 16.
PIP settings (VGA, HDMI, YPbPr mode only):
Active: To select whether activate PIP or not. The defaulted setting is off.
Sources: Select PIP signal source from TV, AV, S, Scart1 or Scart2.
Positions: Select 4 positions for PIP. 0 for top left-hand, 1 for top right-hand, 2 for
bottom right-hand, 3 for bottom left hand.
The defaulted setting is 0.
PIP Size: Select 3 kinds of PIP size (Small, Medium, and Large) The defaulted
setting is Small.
Sound from PIP: To select whether activate the sound from PIP or not. The
defaulted setting is off.
only):
12