To Use The Menu - HANNspree AT06 Service Manual

42‟‟ LCD TV Hannspree AT06
2.2 To Use the Menus
1. Press the MENU button to display or close main menu.
2. Use the cursor up/down to select a menu item.
3. Use the cursor left/right to enter a submenu or enable/disable the
function.
4. Press the MENU button to exit the menu
.
Main Menu
Press the MENU button to enter the main OSD (On Screen Display). Adjust the items including Picture Setup,
Sound setup, Options Setup, Installation Setup(TV setup) and PC Setup(only in pc mode).
Picture Setup:
Preset: choose between Standard, Mild, Personal, Vivid.
Personal gives access to following adjustments.
Contrast, Brightness, Color, and Sharpness: adjust these settings as required using the < / > buttons.
Tint: This option is only available for NTSC audio-visual sources.
Reset : Return to default settings. Press OK or < / > buttons to return to default settings.
Press the MENU button to exit the Picture menu.
Note: this menu is removed automatically after a few seconds without using the remote control.
When you adjust a menu option (Contrast for example), the menu is replaced by a sub-menu as illustrated.Press the
OK button to return to the Picture menu.
Sound Setup :
Balance: adjust the balance between left / right channels as required using the < / > button.
Bass: adjust the bass level as required using the < / >button.
Treble: adjust the treble level as required using the < / > button.
SRS WOW : Using < / >, activate(On) or deactivate(Off) SRS function.
SRS is an audio technology which improves the sound quality.
7