On-Screen Menu Selection - HANNspree ST24HMUB User Manual

On-Screen Menu Selection

Follow the instructions indicated on the bottom of the OSD Function Menu.
CH / CH
• Press
menus.
• Press VOL+ on the control panel or OK to enter a corresponding submenu.
• Press VOL+/VOL- on the control panel or the
setting, and press VOL+ on the control panel or OK to confirm the selection. On certain
menu options, press VOL+ on the control panel or the
setting.
• Toggle MENU to exit the OSD menu.
Picture
Option
Picture Mode
Brightness
Contrast
Saturation
Hue
Sharpness
Color Temp
Backlight
DNR
Aspect Ratio
18
on the control panel or the
Description
Select a preset view option optimized for different viewing
conditions (Vivid/Standard/Soft/User).
Adjust the brightness of the picture (0~100).
Adjust the contrast of the picture (0~100).
Adjust the sharpness or softness of the display (0~100).
Adjust the balance of the red, green, and blue colors in the
display (0~100).
Adjust the sharpness or softness of the display (0~100).
Select the color temperature of the display
(Normal/Warm/Cool).
Adjust the backlight setting of the display (0~10).
Reduce the noise level (Off/Low/Middle/High).
Select the aspect ratio of the display
(Auto/Normal/Wide/Zoom/Cinema).
Auto
Wide
Cinema
/ arrow keys to scroll through the
/ arrow keys to adjust the desired
arrow key to select the desired
Normal
Zoom