Preparation And System Configuration - Hitachi NT2021XA Instruction Manual

Chapter 1 Outline of EzSQ
1.4

Preparation and System Configuration

To create user programs with the easy sequence function of the inverter, you must prepare the following devices and
software:
(1) SJ700 or WJ200 or L700 or SJ700B inverter
(2) Personal computer (PC) (Windows system)
(3) Optional programming software ProDriveNext
(4) Optional PC-inverter connection cable
SJ700
Inverter port: Operator-connection port
WJ200
Inverter port: USBminiB connector
The following figure shows the basic system configuration for programming.
Installation
Optional programming
software ProDriveNext
- Install ProDriveNext on your Windows personal computer, and connect the personal computer to the inverter (SJ700
or WJ200 or L700 or SJ700B) via the PC-inverter connection cable.
- After completing these preparations, you can operate ProDriveNext to create a user program and download it to the
inverter.
The table below lists the main functions of ProDriveNext. Please refer to the manual of ProDriveNext for use.
Function
Programming support
Compilation
Downloading and uploading
Debugging support
User program
Commercially
available Windows
personal computer
Supports the input, editing, saving, reading, and printing of user programs
Compiles an edited user program
Downloads a user program to the inverter
Uploads a user program to from the inverter
Monitors program execution, inverter status, and others
1-2
Optional PC-Inverter
connection cable
Programming
Downloading
Uploading
Description
SJ700 or WJ200
or L700 or SJ700B
Inverter