Signal Strength; New Channel Scan; Channels Menu; Add Channels To List - Hitachi LE46S605 Owner's Manual

Channels

CHANNELS MENU

Select Channels to set your signal source options, run
New Channel Scan, Check Signal Meter and Set Channel
List (Add channels to List, Channel/Labels and Favorite
Channels).
Video
Source

Signal Strength

Audio

New Channel Scan

Setup

Add Channels to List

Channel List
Channels
Channel Labels
Multimedia
Favorite Channels
Set your signal source, perform channel scan or customize the channels list.
Move Select
SEL
Video
Source
Signal Strength
Audio
New Channel Scan
Setup
Add Channels to List
Channel List
Channels
Channel Labels
Multimedia
Favorite Channels
Select the type of signal being used.
Move Select
SEL
1. Press the CURSOR PAD
2. Press the SELECT button or the CURSOR PAD
the next popped-up menu.
3. Press the CURSOR PAD ▲ or ▼ to select.
Source
Select the signal Source for the TV. When using an indoor
or outdoor antenna select Air. When using a cable system
select Cable.
Signal Strength
Select Signal Strength when using an indoor or outdoor
antenna. This feature will show the signal strength of the
antenna signal to help you adjust your antenna to optimize
signal reception. Use the MENU or the EXIT button to
return.
• The Signal Strength meter will not be
NOTE
available (grayed out) when watching
analog channels.
Air
Return Exit
EXIT
Air
Return Exit
EXIT
or to highlight functions.
enter
New Channel Scan
This feature will automatically store active Analog and
Digital channels to the Channel list. This scan will erase all
channels previously stored in the list.
Video
Source
Signal Strength
Audio
New Channel Scan
Setup
Add Channels to List
Channel List
Channels
Channel Labels
Multimedia
Favorite Channels
Search for active channels and store them to the channel list. This scan
erases all channels previously saved before storing new channels.
Move Select
SEL
1. Use the CURSOR PAD
SELECT button to start scanning.
• If you do not want to erase all scanned
NOTE
channels, please use the Add Channels
to List option instead.
Add Channels to List
This function allows you to add channels to the channel
memory. Sometimes adjusting the antenna direction will
allow reception of additional channels.
Video Searching, Please wait...
Searching Digital CH
Audio
Digital Channels Found
Setup
Analog Channels Found
Channels
16%
Multimedia
Add Channels to the Channel List. Scanned channels will remain until a New
Channel Scan is performed.
Move Select
SEL
1. Use the CURSOR PAD or
to List.
2. Press the SELECT button to start scanning.
3. Press the EXIT button to return to normal viewing.
• Only the Channels that have been added
NOTE
to the list will be stored.
Air
Return Exit
EXIT
or to highlight then press the
Channel 23
2
0
Skip
Return Exit
EXIT
to select the Add Channels
45