Reception Problems - Hitachi LE46S605 Owner's Manual

42/46" class (42.02/45.99 diagonal)
Hide thumbs Also See for LE46S605:
Table of Contents

Advertisement

Reception Problems

The TV set can generate sound distortion in external devices such as a radio. Please separate radio device
NOTE
from the TV set to a considerable distance.
IGNITION NOISE:
Black spots or horizontal streaks may appear, picture may flutter or drift. Usually caused
by interference from automobile ignition systems, neon lamps, electrical drills, and other
electrical appliances.
GHOSTS:
Ghosts are caused by the television signal following two paths. One is the direct path
and the other is reflected from tall buildings, hills or some other objects. Changing the
direction or position of the antenna may improve reception. Ghosting may also be caused
by defects in the antenna system such as unshielded leads or connecting several sets to
the same antenna without using multiple antenna couplers.
SNOW:
If your receiver is located in the fringe area of a television station where the signal is
weak, your picture may be marred by the appearance of small dots. When the signal is
extremely weak, it may be necessary to install a special antenna to improve the picture.
RADIO FREQUENCY INTERFERENCE:
The interference produces moving ripples or diagonal streaks, and in some cases,
causes loss of contrast in the picture.
PREVENTION OF AN OBSTACLE TO RADIO RECEIVERS
This television has been designed pursuant to the FCC class B Rules. This is to prevent
a problem to Radio receivers. If this television causes a problem to Radio receivers, then
take the following steps:
Keep the television away from Radio.
Adjust Radio antennas in order for the television not to receive interference.
The antenna cable of Radio should be kept away from the television.
Use a coaxial cable for antenna.
You can check if this television influences Radio receivers by turning off all other device
other than the television. If you find a problem receiving Radio when using the television,
check the instructions mentioned above.
BLOCK NOISE or FREEZE (DIGITAL INPUT):
Fuzzy blocks may appear in some area or the whole area of the screen. This is usually
caused by interference from automobile ignition systems, neon lamps, electrical drills,
ghosting of the image and lost or weak receiving signals.
BLACK SCREEN:
When using an antenna, weak signals will display a black screen. It may be necessary to
upgrade your antenna.
51

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Le42s605

Table of Contents