Sanyo SAP-K9AP Instruction Manual page 12

4. OPERATION OF WIRELESS REMOTE CONTROL UNIT
4.3 Using the General Operation
NOTE
STEP 1
STEP 2
STEP 3
STEP 4
NOTE
STEP 5
Operation and Maintenance
STEP 1
STEP 3
STEP 4
Press the setting buttons as described below and change the settings
as desired.
To start the air conditioner, press the ON/OFF operation button.
Press the MODE selector button and select the desired mode.
For DRY operation
For COOLING operation
For FAN only operation
For AUTO operation
For HEATING operation
Press the TEMP. setting buttons to change the temperature setting
to the desired temperature.
Adjustable temperature range:
30 °C (86 °F) max.—16 °C (61 °F) min.
Under "AUTO" operation, the temperature can not be adjust.
Under other operation, the initial value is 25 °C (77 °F).
Set the FAN SPEED selector button to the setting you want.
A UTO : Auto fan speed.
: Low fan speed.
: Middle fan speed.
: High fan speed.
Under Dry mode, the fan speed is automatically set to LOW.
button and set the air blow direction as desired or
Press the
.
automatically
To STOP the air conditioner, press the ON/OFF operation button again.
STEP 2
STEP 5
(Not function for cooling only model)
10