Advertisement
３－５ Kit Oil Dip Stick Installation
(1) Remove the O-ring from the OE dipstick guide and
place it on the Kit dipstick guide.
※
If the O-ring is damaged, please replace with OEM
part.
(2) Place the Kit dipstick guide in the factory location on
the engine block and attach the bracket to the
supercharger Assy and tighten bolt.
３－６ Alternator Installation
(1) Attach the alternator to the lower alternator bracket
installed in step 3-2.
※ Use OEM bolt
(2) Attach the upper alternator bracket to the alternator
and torque the lower alternator bolt.
※
Use OE bolt on the alternator side of the bracket and
provided bolt for the engine side of bracket.
Torque spec： Ｍ８ bolt
Ｍ１０ bolt ５８Ｎ・ｍ （５８０ｋｇｆ・ｃｍ）
３－７ Kit Tensioner Pulley Installation
Attach the Kit tensioner pulley to the lower
alternator bracket with the spacer between the
pulley and bracket. Use the provided bolt to attach
pulley to bracket.
※
Place the pulley so the rim faces the bracket.
※
Use thread lock on the pulley bolt.
〈Part №９〉
２９Ｎ・ｍ （２９０ｋｇｆ・ｃｍ）
〈Parts №６，２６〉
〈Parts №４，１０，３２〉
OE dipstick
guide
Upper alternator bracket
Rim
―８―
Kit dipstick
guide
Bracket bolt
Advertisement
