Grandstream Networks GXP1450 User Manual page 30

LDAP Directory
Idle Screen XML
Download
Download Screen XML
At Boot-up
Use custom filename
Idle Screen XML Server
Path
Offhook Auto Dial
Syslog Server
Syslog Level
Send SIP Log
NTP server
Allow DHCP Option 42
to override NTP server
Grandstream Networks, Inc.
IP address or domain name of LDAP script server.
Note: When LDAP Directory is used, please set "Phonebook XML Download" to
Yes to enable it.
Enable XML Idle Screen download via TFTP or HTTP. Select whether to "Use
Custom Filename" or not, and define the "XML server path".
The phone will download the idle screen xml file if set to "Yes". The default setting
is "No".
The phone will use custom filename specified in XML server path if set to "Yes".
The default setting is "No".
Specify the idle screen XML server path.
To configure a User ID/extension to dial automatically when the phone is taken
offhook.
The IP address or URL of System log server. This feature is especially useful for
ITSPs.
Select the syslog level for GXP1450 to report. Default is NONE.
The level is one of DEBUG, INFO, WARNING or ERROR. Syslog messages are
sent based on the following events:

product model/version on boot up (INFO level)

NAT related info (INFO level)

sent or received SIP message (DEBUG level)

SIP message summary (INFO level)

inbound and outbound calls (INFO level)

registration status change (INFO level)

negotiated codec (INFO level)

Ethernet link up (INFO level)

SLIC chip exception (WARNING and ERROR levels)

memory exception (ERROR level)
The Syslog uses USER facility. In addition to standard Syslog payload, it contains
the following components: GXP_1450: [device MAC address][firmware version]
error message.
For example:
Nov 30 07:55:46 10.131.28.27 GXP1450_GUI:[00:0b:82:2b:3c:a4][1.0.1.108][-LCD-
] IdleScreen/XmlApp is now visible
When setting the "Yes", phone will send out SIP Log to syslog server. Default
setting is "No".
This parameter defines the URI or IP address of the NTP (Network Time Protocol)
serve. It is used to display the current date/time.
Default is "Yes". This allows device gets provisioned for DHCP Option 42 from the
server automatically.
GXP1450 User Manual
Firmware 1.0.1.110
Page 29 of 42
Last Updated: 01/2012