Grandstream Networks GXP1450 User Manual page 29

Allow DHCP Option 43
and Option 66 to
override server
Automatic Upgrade
Authenticate Conf File
Enable TR-069
ACS URL
TR-069 Username
TR-069 Password
Periodic Inform Enable
Periodic Inform Interval
Connection Request
Username
Connection Request
Password
Authentication Method
Connection Request
Port
Phonebook XML
Download
Phonebook XML Server
Path
Phonebook Download
Interval
Remove Manually-edited
entries on Downloads
Grandstream Networks, Inc.
Default is "Yes". This allows device gets provisioned from the server automatically.
Default is "No". Choose "Yes" to enable automatic HTTP upgrade and provisioning.
In "Check for upgrade every" field, enter the number of minutes to check the HTTP
server for firmware upgrade or configuration changes. When set to "No", the phone
will only perform HTTP upgrade and configuration check once at boot up.
Note: This function is used by ITSP. End user should NOT touch these parameters.
Default is "No". If set to "Yes", configuration file would be authenticated before
acceptance. End user should use default setting.
Default is "No".
URL for TR-069 Auto Configuration Servers (ACS).
Enter ACS username for TR-069.
Enter ACS password for TR-069.
Enable periodic inform. Default is "No". If set to YES, device will send inform
packets to the ACS.
When enabling periodic inform, set up the periodic inform interval to send the inform
packets to the ACS.
Enter the connection request username. This is the user name for the ACS to
connect to this device.
Enter the connection request password. This is the password for the ACS to
connect to this device.
Select the authentication method among "No authentication", "Basic" or Digest.
Enter the connection request port.
Selects the file download mode for the download server. Users can choose from
TFTP/HTTP/No.
The URL/IP address of the phonebook download server.
The interval at which the phonebook will be downloaded from the download server
(in Minutes). The default setting is 0.
If set to "Yes", the phone will remove the manually-edited entries in the old
phonebook list before downloading the new file. The default setting is set to "Yes".
Note:
If there is a duplicate entry (same name, same number and same index) added
both manually and from phonebook xml file, only 1 entry will be saved and
displayed.
GXP1450 User Manual
Firmware 1.0.1.110
Page 28 of 42
Last Updated: 01/2012