Grandstream Networks GXP1400 User Manual page 48

Idle Screen XML Download
Download Screen XML At
Bootup
User Custom Filename
Idle Screen XML Server Path
Offhook Auto Dial
Auto Recover From Abnormal
Syslog Server
Syslog Level
Send SIP Log
NTP Server
Allow DHCP Option 42
Override NTP Server
FIRMWARE VERSION 1.0.4.23
gn
cn sn description
Configures to enable idle screen XML download. Users could select
HTTP/HTTPS/TFTP to download the XML idle screen file. The default
setting is "No".
If set to "Yes", the idle screen XML file will be downloaded when the
phone boots up. The default setting is "No".
Specifies the custom file for the idle screen XML file to be downloaded.
Configures the server path to download the idle screen XML file. This
field could be IP address or URL, with up to 256 characters.
Configures a User ID/extension to dial automatically when the phone is
off hook. The phone will use the first account to dial out. The default
setting is "No".
Configures whether auto recover or not when the phone is running
abnormal. The default setting is "Yes".
The URL or IP address of the syslog server for the phone to send syslog
to.
Selects the level of logging for syslog. The default setting is None. There
are 4 levels: DEBUG, INFO, WARNING AND ERROR.
Syslog messages are sent based on the following events:
•
product model/version on boot up (INFO level);
•
NAT related info (INFO level);
•
sent or received SIP message (DEBUG level);
•
SIP message summary (INFO level);
•
inbound and outbound calls (INFO level);
•
registration status change (INFO level);
•
negotiated codec (INFO level);
•
ethernet link up (INFO level);
•
SLIC chip exception (WARNING and ERROR levels);
•
memory exception (ERROR level).
Configures whether the SIP log will be included in the syslog messages
or not. The default setting is "No".
Defines the URL or IP address of the NTP server. The phone may obtain
the date and time from the server.
Defines whether DHCP Option 42 should override NTP server or not.
When enabled, DHCP Option 42 will override the NTP server if it's set
up on the LAN. The default setting is "Yes".
GXP1400/GXP1405 USER MANUAL Page 48 of 60