Choice Of The Dvd Player Location; Power Connection - Goldmund SRDVD MULTIFORMAT PLAYER User Manual

2
S E T T I N G U P T H E S R D V D
2 . 3
C H O I C E O F T H E D V D P L AY E R L O C AT I O N
To get the best result, especially in Audio, you will have to select a very rigid support for your
DVD Player.
Due to the specific quality of its Goldmund "Mechanical Grounding" construction, the Goldmund
DVD Player is less critical than other designs in placement selection. Feedback is mostly so low
that no special precaution is required. Nevertheless, position the player as far as you can of the
speakers if you want to totally avoid the air coupling between the speakers and the DVD player.
Select a position of the support where the transport is set to have the most rigid possible
connection to the floor. Solid coupling is essential, and if your support is standing on a
suspended floor, optimal result requires that you arrange the support to have at least one foot
over a supporting beam or close enough from a supporting wall.
P O W E R C O N N E C T I O N
Plug the AC power cord to the back of the SRDVD and in a wall socket.
Switch the back power switch ON.
The front display will glow on as soon as you press any key or when pressing the remote control
STANDBY/ON button, meaning the unit is now powered on.
User manual - GOLDMUND SRDVD MULTIFORMAT PLAYER |
P 7