Editing A Program List P - Goldmund SRDVD MULTIFORMAT PLAYER User Manual

Note: To exit the program edit screen without star-ting
playback, press P LAY MODE or S E T UP. (Don't press
RETURN, your program list will be lost.)
- During program play, press "Next" to skip to the next
program step.
Press CLEAR during playback (though not if the program
list OSD is displayed)
to switch off program play. Press while stopped to erase
the program list.
Note: To exit the program edit screen without star-ting
playback, press PLAY MODE or SETUP.
- If you want to exit the program edit screen without
saving the changes youmade, press RETURN.
3
O P E R AT I N G T H E S R D V D
3 . 6
P L AY I N G D I S C S
C
REATING A PROGRAM LIST (condt.)
After pressing ENTER to select the title/group/chapter/folder/track, the step number automati-
cally moves down one.
4 Repeat step 3 to build up a program list.
A program list can contain up to 24 titles/chapters/groups/folders/tracks.
5 To play the program list, press (play).
Program play remains active until you turn off program play (see below), erase the program
list (see below), eject the disc or switch off the player.
E
DITING A PROGRAM LIST
After creating a program list, you can add, delete and change steps.
1 Press PLAY MODE and select 'Program' from the list of functions on the left.
'Program' from the list of functions on the left.
2 Select 'Create/Edit' from the list of program options.
3 To clear a step, highlight the step number and press CLEAR.
4 To insert a step in the middle of the program list, highlight the step where you want the
new step to appear, then select a title/group/chapter/folder/track to add. After pressing
ENTER, the new step is inserted into the list.
5 To add a step to the end of the program list, highlight the next free step then
select a title/group/chapter/folder/ track to add.
User manual - GOLDMUND SRDVD MULTIFORMAT PLAYER |
P 27