Frame Advance/Frame Reverse P; Looping A Section Of A Disc P - Goldmund SRDVD MULTIFORMAT PLAYER User Manual

Note: The picture quality when using frame reverse is not
as good as frame advance.
- Depending on the disc, normal playback may
automatically resume when a new chapter is reached.
- When changing direction of a DVD Video disc, the picture
may 'move' in an unexpected way. This is not a
malfunction.
- For DVD-Audio discs featuring browsable pictures (see
below), press Reverse/Forward view the previous/next
picture.
Note: A-B Repeat is not available with SACDs,MP3s, Video
CD in PBC mode, or while a DVD disc menu is being
displayed.
3
O P E R AT I N G T H E S R D V D
3 . 6
P L AY I N G D I S C S
F /
RAME ADVANCE FRAME REVERSE
You can advance or back up DVD-Video or DVD-RW discs frame-by-frame. With Video CDs, you
can only use frame advance.
1 During playback, press (pause).
2 Press Reverse or Forward buttons to reverse or advance a frame at a time.
3 To resume normal playback, press (play).
L
OOPING A SECTION OF A DISC
The A-B Repeat function allows you to specify two points (A and B) within a track (DVD-Audio,
CD and Video CD) or title (DVDVideo and DVD-RW) that form a loop which is played over and
over.
1 During playback, press PLAY MODE and select 'A-B Repeat' from the list of functions on
the left.
2 Press ENTER on 'A(Start Point)' to set the loop start point.
3 Press ENTER on 'B(End Point)' to set the loop end point. After pressing ENTER, playback
jumps back to the start point and plays the loop.
4 To resume normal playback, press CLEAR or select 'Off' from the menu.
User manual - GOLDMUND SRDVD MULTIFORMAT PLAYER |
P 23