Choice Of Amplifier Location And Cooling - Goldmund TELOS 600 User Manual

1
U N PA C K I N G
You will find in the GOLDMUND TELOS 600 box:
The amplifier
The power cord
This manual
Please keep the packaging in case you need to transport the amplifier at a later date.
WARNING
IF YOU NEED TO RETURN THE TELOS
FOR A WARRANTY REPAIR, PLEASE NOTE THAT IT MUST BE REPACKED IN THE ORIGINAL
PACKAGING.
THIS PACKAGING HAS BEEN DESIGNED SPECIFICALLY TO PROTECT YOUR TELOS
USE OF ALTERNATIVE PACKAGING IS LIKELY TO RESULT IN DAMAGE, INVALIDATING WARRANTY
COVER.
2

CHOICE OF AMPLIFIER LOCATION AND COOLING

The GOLDMUND TELOS 600 amplifier, as all high quality amplifiers generates a large amount
of heat when driven at high levels and must be vented properly. It is mandatory to allow a
proper cooling of the heat sinks. Do not put temperature sensitive equipment on top of the
amplifier.
Due to its weight, and to maximize the effect of the built-in "Mechanical Grounding"
construction, the TELOS 600 is better located on the floor. Other very strong supports can be
used if they offer rigid transmission to the floor.
The TELOS 600 is built on four very hard conical feet to ensure proper vibration transmission
to the amplifier support. This evacuates all detrimental vibrations inside the amplifier,
following the famous GOLDMUND "Mechanical Grounding" principle.
If you use more than one TELOS 600 at any location, you may decide to stack them. Be
careful that the conical feet of the top amp are inserted properly on the top of the steel bars
of the amplifier located below. You may stack up to 3 amps provided extra care is taken to
ensure proper air circulation vents the rear heat-sinks.
Depending on the flatness of the surface where the amplifier will be located, you will can
adjust the four round flat feet of the amplifier to allow full contact of the points with the
support.
T E L O S 6 0 0 U N I V E R S A L P O W E R A M P L I F I E R
600
TO THE FACTORY OR TO YOUR LOCAL REPRESENTATIVE
User manual - GOLDMUND TELOS 600 UNIVERSAL POWER AMPLIFIER
600 IN TRANSIT.
| P 4