Other Settings; Auto Off-No Sig; Audio Input; Screen Orbiter - Fujitsu Plasmavision P42VHA51W SERIES User Manual

OTHER SETTINGS

Auto Off-NO SIG.

You can make to the standby state automatically when the no signal state continued during set up time.
Press to select the "Time".
Press to select the amount of time before the standby state starts.
Off 1 min. 15 min.
Press
to store.
* The numerical value is the approximate amount of time before the standby state starts.
You can assign the black or white color for the background color at the no signal state.
Press to select the "Background".
Press to select the displayed background displayed.
Black White
Press to store.
* The background color changes to assigned color state after approximate 20 seconds at the no signal state.

Audio Input

You can use this option to select the available terminals to receive the audio from input equipment.
(1) Select "Audio Input" and press
The "Audio Input" setting screen will appear.
(2) Press or to select video input terminal.
(3) Select a related audio input terminal.
Each time you press
No Audio Audio1
[No Audio]: No audio in the corresponding mode.
[Audio 1-3]: Selects Audio 1 through 3 for receiving audio in the corresponding mode.
[Audio 4-5]: HDMI
* There is also "Audio Input" that cannot be selected.
* Repeat steps (2) and (3) for each piece of input equipment.
(4) Press to store.
* AUDIO menu will not be displayed when "No Audio" is selected.

Screen Orbiter

You can use this option to move the screen position to minimize phosphor-induced "burn-in".
Follow the steps below.
(1) Select "Screen Orbiter" and press
The "Screen Orbiter" setting screen will appear.
(2) Press or to select "Mode/Time".
(3) Select a desired pattern.
Each time you press
Off Time Mode
[Off]: Disables Screen Orbiter.
[Time]: Moves the pattern approximately every one hour.
[Mode]: Moves the pattern when the power is turned ON or when you switch between modes.
(4) Press or to select "Moving Area".
(5) Press or to select the range for moving the pattern.
Each time you press
45 min. 60 min.
.
or , one of the available choices appears in the following sequence:
Audio2 • • • • •
.
or , one of the available choices appears in the following sequence:
or , one of the available choices appears in the following sequence:
"Auto Off-NO SIG." selection
screen
"Audio Input" setting screen
for RGB
"Screen Orbiter" setting screen
E-23