Adjusting The Picture; Signal Contrast; Drive Contrast; Brightness - Fujitsu Plasmavision P42VHA51W SERIES User Manual

ADJUSTING THE PICTURE

• Picture-related items can be set and adjusted in the Picture Adjustment Screen. See BASIC PROCEDURES OF ADJUSTMENT MENU
on page E-16 for the basic procedures.

Signal Contrast

Press to increase the input signal contrast.
Press to reduce the input signal contrast.
Press to store.

Drive Contrast

Press to raise the display's luminance level, and increase the contrast.
Press to lower the display's luminance level, and reduce the contrast.
Press to store.
* If Ambient Sensor is ON, the change made by this adjustment may be difficult to be recognized in too bright or dark a place.

Brightness

Press to increase the brightness.
Press to reduce the brightness.
Press to store.

Color

Press to darken the color.
Press to lighten the color.
Press to store.

Tint

Press to change the tint to a more greenish color.
Press to change the tint to a more purplish color.
Press to store.

Sharpness

Press to sharpen the Sharpness.
Press to soften the Sharpness.
Press to store.

Ambient Sensor

Ambient Sensor can be set.
Automatically adjusts the picture quality to an optimized level that matches the brightness of the ambient light.
Each time or is pressed, the setting is switched.
On Off
Press to store.
Note
• If the operation is not executed for about 60 seconds, the menu disappears.
• Depending on the model or the optional devices, some of the functions may not be available.
• The adjustment range varies according to the display signals. Make adjustments to your preferred picture quality within the adjustment range.
• Depending on the type of signal, it may not be possible to make some of the settings or adjustments.
E-17