USER’S MANUAL (1/2) (Specification and Part Names) 42” WIDE PLASMA DISPLAY P42HCA30W/P42HCA30E/P42HCA30A/ P42VCA30W/P42VCA30E/P42VCA30A/ HE4VS01W/HE4VS01E/HE4VS01A • Accessories ······················································ E-2 • Part Names and Functions ······················ E-3–E-5 • Installation ······················································· E-6 • Options ····························································· E-7 • Main Supported Signals ································ E-8 • Specification ··········································· E-9–E-10 Before using the display, read the User’s manual (1/2) and the User’s manual (2/2) carefully so that you know how to use the display correctly.
ACCESSORIES CHECKING ACCESSORIES One remote control Two AA batteries CONNECTING THE DISPLAY TO EXTERNAL EQUIPMENT Carefully check the terminals for position and type before making any connections. Loose connectors can result in picture or color problems. Make sure that all connectors are securely inserted into their terminals. Ferrite cores These ferrite cores are used to attenuate undesired signals.
PART NAMES AND FUNCTIONS Front ① ② Warning If the power indicator lamp flashes red or green, this signifies that the display has developed a problem. When this happens, be sure to remove the power plug from the receptacle and contact your dealer. Leaving the display power ON can result in fire or electric shock. 1 Power indicator lamp This lamp shows the state of the power supply.
PART NAMES AND FUNCTIONS (Continued) Bottom 1 OFF/STD-BY switch :The power indicator lamp goes off, and the power can’t be turned on by the power button. The power is partly supplied. STD-BY :The power indicator lamp lights red, and the power can be turned on or off by the power button. 2 RS-232C terminal (RS-232C) This terminal is provided for you to control the display from the PC.
Description of Input Terminals RGB1 terminal (RGB1 INPUT/mD-sub) RS-232C terminal (RS-232C) * Terminal layout may differ and functions may not be available with some models and some device options. Pin No. Input signal Pin No. — Green Ground Blue — —...
INSTALLATION To prevent the display’s internal components from overheating, make sure that the display is installed in a well-ventilated location. Be sure to use the optional desktop stand, ceiling-mounting unit, wall-mounting unit and other unit when installing this display. Also, be sure that your dealer performs the installation.
To prevent injury, fire, and electric shock, arrange for options to be initially installed (or installed at a different location) by your dealer. CAUTION: This display (P42HCA30/P42VCA30/HE4VS01) is for use only with Fujitsu General Limited’s option (P-WB4201, P-CT4200, P-TT4200). Using this display with other option can cause instability resulting in possible injury.
MAIN SUPPORTED SIGNALS This display can store the latest four types of signals for RGB adjustment value. The fifth input signal will delete the adjustment value of the first input signal. To do this, select a desired signal and follow the instructions in “Adjusting Screen Position and Size” on the User’s Manual (2/2) to adjust the parameters.
• Viewing the screen constantly for extended periods can strain your eyes. Be sure to stay at a proper distance (at least 1.6 m or 5.2 feet) from the screen and to look occasionally away while working. • is a worldwide trademark of Fujitsu General Limited and is a registered trademark in Japan, the U.S.A. and other countries or areas. P42HCA30W/P42HCA30E/P42HCA30A (does not include outer projections)
• Viewing the screen constantly for extended periods can strain your eyes. Be sure to stay at a proper distance (at least 1.6 m or 5.2 feet) from the screen and to look occasionally away while working. • is a worldwide trademark of Fujitsu General Limited and is a registered trademark in Japan, the U.S.A. and other countries or areas. E-10 HE4VS01W/HE4VS01E/HE4VS01A 31.5 kg / 69.4 lbs...
USER’S MANUAL (2/2) (Precautions and Adjustment Methods) WIDE PLASMA DISPLAY Before Use • Safety Precautions ···························································································· E-2–E-3 Usage • Handy Tips ················································································································· E-4 • Connecting the Display to External Equipment ······················································ E-5 • Using the Remote Control ················································································ E-6–E-7 • Basic Operations ······································································································· E-8 •...
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. – Consult the dealer or an experienced radio/TV technician for help. IMPORTANT SAFETY INSTRUCTIONS Electrical energy can perform many useful functions. This unit has been engineered and manufactured to assure your personal safety. But IMPROPER USE CAN RESULT IN POTENTIAL ELECTRICAL SHOCK OR FIRE HAZARD.
14) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power- supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, dose not operate normally, or has been dropped.
HANDY TIPS RECEPTACLE Make sure that the power cable’s grounding wire is grounded. The display comes with a 3-prong power plug; one prong is connected to the grounding wire. If you have only a 2-hole receptacle, you will need to have it replaced. Contact your dealer for more information. •...
CONNECTING THE DISPLAY TO EXTERNAL EQUIPMENT Be sure to turn OFF the power to the display and external equipment before making any connections. No cables are supplied with the display for connection to external equipment. The type of cable to be used varies depending on the PC model.
USING THE REMOTE CONTROL Remote Control PUTTING BATTERIES IN THE REMOTE CONTROL 1 To remove the cover, slide it outwards while pressing it down. CAUTION: Be sure to use replacement batteries of the same type as the original ones. When disposing of used batteries, please comply with governmental regulations or environmental public institution’s rules that apply in your country/area.
PRECAUTIONS To prevent malfunction, be sure not to apply any form of severe shock to the remote control. To prevent malfunction or deformation, be sure not to allow the remote control to become wet; also, keep it away from hot locations or heating equipment.
• A variety of picture modes are available with this display. Remember that if you select a mode with an aspect ratio (ratio of frame width to frame height) different from that of the TV program or video media, the pictures will appear differently than if you had selected a mode having the same aspect ratio.
WATCHING PICTURES ON THE WIDE SCREEN SWITCHING BETWEEN SCREEN SIZES Press The currently selected mode will appear. Press picture mode. Each time you press appears. The sequences used are as follows: When you are in an RGB input mode * Depending on the type of signal, some aspects SCREEN SIZE Normal Displays pictures of normal size (i.e., a 4:3 aspect ratio).
ADJUSTING PICTURES (PICTURE MENU) BASIC OPERATIONS [EX.: ADJUSTING TINT (Tint)] You can make changes to all picture adjustment options in the PICTURE Menu. The changes you make will be stored for a selected input mode. Therefore, you need to select a desired input mode before making any changes.
• Contrast, brightness, color darkness, tint, and picture sharpness are adjusted as shown in the following chart. Select the item with , and then adjust with Adjustment Item Contrast Brightness Color Tint Sharpness • Setting Picture Mode (Picture Mode) Can set up the picture mode. Each time you press , one of the available choices appears in the following sequence: Dynamic: Suitable for watching a normal motion picture.(Standard)
ADJUSTING SCREEN POSITION AND SIZE (POSITION/SIZE MENU) BASIC OPERATION [EX.: ADJUSTING HORIZONTAL DIRECTION OF SCREEN POSITION] You can make changes to all screen adjustment options in the POSITION/SIZE Menu. The changes you make will be stored for the selected input mode. Therefore, you need to select a desired input mode before making any changes.
Adjusting Screen Position (Position) Horizontal position (Horizontal) : Moves screen to the right. : Moves screen to the left. Vertical position (Vertical) : Moves screen up. : Moves screen down. Press to store. Adjusting Screen Size (Size) Screen width (Width) : Increases width.
OTHER ADJUSTMENTS (FEATURES MENU) BASIC OPERATION [EX.: SELECTING LANGUAGE (Language)] You can make the following changes in the FEATURES Menu. Press The main menu screen will appear. Press Each time you press menus appears in the following sequence: PICTURE The FEATURES Menu screen will appear. Press Menu".
• FEATURES setup screen has the following 4 options. Adjustment : Can make a fine adjustment of pictures such as Dot Clock, Clamp Position. On Screen Menu : Can make a display setting such as OSD, Language. (See P. E-16.) Input Terminal : Can make an input terminal setting such as D-SUB Input.
OTHER ADJUSTMENTS (FEATURES MENU)(Continued) ON SCREEN MENU • Setting Display Information (OSD) You can use this option to select whether to display information other than menus. (Error messages are displayed regardless of what choice you make for this option.) Each time you press , one of the available choices appears in the following sequence: On : Displays all information.
OTHERS MENU • Selecting time before DPMS starts (DPMS) You can use this option to select the amount of time before the DPMS function starts. DPMS (which stands for “display power management signaling”) allows the display to maintain an automatic power saving function. This function causes on-screen information to disappear until the next input operation, if the power is ON and the display has not received any signals for the predetermined period of time.
OTHER ADJUSTMENTS (FEATURES MENU)(Continued) • Minimizing phosphor burn-in (Screen Orbiter) You can use this option to move the screen position to minimize phosphor-induced “burn-in”. Follow the steps below. (1) Select “Screen Orbiter” and press The “Screen Orbiter” setting screen will appear. (2) Press to select “Mode/Time”.
• Assigning Numbers to Displays (Monitor No.) When you use two or more displays, you can use a single remote control to control individual displays by assigning a unique number to each of the displays. Each time you press , one of the available numbers appears in the following sequence: You can normally control displays.
OTHER ADJUSTMENTS (FEATURES MENU)(Continued) • Setting Exhibition Mode (Exhibition Mode) You can use this option to display the enhanced contrast, which is most suitable for the use by unspecified persons. Each time you press , one of the available choices appears in the following sequence: On: Sets up Exhibition mode.
INITIALIZATION OF USER ADJUSTMENT VALUE (FACTORY DEFAULT) You can restore the values of the adjustment/setting made in the MENU to factory settings. Press The main menu screen will appear. Press DEFAULT”. Each time you press menus appears in the following sequence: PICTURE The FACTORY DEFAULT Menu screen will appear.
CLEANING AND MAINTENANCE Precautions Be sure to remove the power plug from the receptacle before cleaning the display. Be sure not to clean the display using a cloth dampened with volatile solvents, such as benzene or thinner. Such solvents can harm the display’s cabinet, the filter at the screen front, and the remote control.