Before Use • INFORMATION... E-2 • INSTALLATION ... E-3 Usage • PART NAMES AND FUNCTIONS... E-4 Others • OPTIONS... E-8 • MAIN SUPPORTED SIGNALS... E-9 • SPECIFICATIONS... E-10 Before using the display, read the User’s manual (1/2) and the User’s manual (2/2) carefully so that you know how to use the display correctly.
INFORMATION CHECKING ACCESSORIES Two small One power cable ferrite cores No.:ZCAT1518-0730 Mfr.:TDK Two AA batteries ATTACHING THE FERRITE CORES The ferrite cores are used to reduce noise. Attach them correctly as shown in the following illustrations. Be sure to turn off power of the plasma display and external equipment before making any connections. Carefully check the terminals for position and type before making any connections.
INSTALLATION To prevent the plasma display's internal components from overheating, make sure that the plasma display is installed in a well-ventilated location. Be sure to use the optional stand, wall-mounting unit or the other mounting unit when installing the plasma display. Also, be sure that your dealer performs the installation.
PART NAMES AND FUNCTIONS DISPLAY SECTION – FRONT Warning If the power indicator lamp flashes red or green, this signifies that the display has developed a problem. When this happens, be sure to remove the power plug from the receptacle and contact your dealer. Leaving the display power ON can result in fire or electric shock. Power indicator lamp (Right section) This lamp shows the state of the power supply.
DISPLAY SECTION – BACK AND BOTTOM PART / I power switch If this button is pressed when the power indicator lamp is off, the indicator lamp will light. The power can be turned on and the standby mode selected by using the remote control or the control panel of the display. If this button is pressed when the power indicator lamp is lit, the indicator lamp will go out.
PART NAMES AND FUNCTIONS (Continued) RGB1 input terminal (RGB1 INPUT/mD-sub) Connect this terminal to the PC’s display (analog RGB) output terminal or decoder (digital broadcast tuner, etc.) output terminal. Component video input terminal (VIDEO3 INPUT) Component video input terminal (VIDEO4 INPUT) Connect this terminal to the component video output (color difference output) terminal of your HDTV unit or DVD player.
DESCRIPTION OF INPUT TERMINALS mD-sub input terminal (RGB1 INPUT/mD-sub) RS-232C terminal (RS-232C) HDMI input terminal (VIDEO5 INPUT/HDMI) HDMI, the HDMI logo and High-Definition Multimedia interface are trademarks or registered trademarks of HDMI Licensing LCC. Pin No. Input signal Pin No. Green Blue —...
To prevent injury, fire, and electric shock, arrange for options to be initially installed (or installed at a different location) by your dealer. CAUTION This display (P42VHA51/P42HHA51/P50XHA51) is for use only with Fujitsu General Limited's option (P-WB4201, P-CT4200, P-TT4202). This display (P55XHA51) is for use only with Fujitsu General Limited's option (P-WB6300, P-CT6300, P-TT4202).
MAIN SUPPORTED SIGNALS This display can store the latest four types of signals for RGB adjustment value. The fifth input signal will replace the adjustment value of the first input signal. To do this, select a desired signal and follow the instructions in “Adjusting Screen Position and Size” on the User’s manual (2/2) to adjust the parameters.
1.9 m or 6.2 feet for 50" / at least 2.1 m or 6.9 feet for 55") from the screen and to look occasionally away while working. • is a worldwide trademark of Fujitsu General Limited and is a registered trademark in Japan, the U.S.A. and other countries or areas. E-10...