Table of Contents
Advertisement
DVR Setup
5.DVR Setup
5.1 Main Menu
Digital video Recoder Monitor
Dual
4
PAL NTSC
Main Menu
5.2 Camera Select
8%
OFF
1 2
3 4
OFF
2008/08/08 08:08:08
Digital video Recoder Monitor
Dual
4
PAL NTSC
5.3 Record Select
Configure which channel is allowed to record.
5.4 Record Mode
Each Mode
Compress and record each channel video separately, therefore, user
can enlarge single channel video to full screen display. For example,
user can turn off record function of CH~1 and CH~2 and then system
only record CH3 and CH4 video.
Press[
display when playback recorded video.
Only in this mode, when system is in watching mode or recording mode,
press [
enlarge to full screen and then display in quad mode in sequence again
Press[
[
DOWN] to select item, press [
setting and [
Monitor
UP
DATA+
POWRE
MENU
DOWN
DATA
Menu Directory
Camera Select
Record Select
Record Mode
Record Frame Rate
Video Quality
Record Schedule
Sub Menu
Hard Disk Setup
Alarm Setup
Restore Factory Default
Your DVR can display 4 cameras on one screen (Quad
Mode). You can configure which camera(s) to display.
OFF
Press [
[
CH1] [
OFF
channel separately. If a channel is not used, the system
will display
Monitor
UP
DATA+
POWRE
MENU
DOWN
DATA
CH1], [
CH2], [
QUAD] button over 3 seconds to make each channel video
MENU] to enter MAIN MENU, use [
MENU] to confirm and
Auto Recode
Password Setup
Password Change
Picture Setup
Time Setup
PTZ Setup
SEL/EDIT] to change the setting or press
CH2]
[
CH3] [
OFF on the monitor for that channel.
.......................................................
CH3], [
CH4] to switch channel to
..............................................
6
UP] and
SEL/EDIT] to modify
exit......................
......
CH4] to set each
..........
Advertisement
Table of Contents
