Ptz Control And Setup; Setup; Control; Setting Preset/Patrol/Pattern/Scan - Q-See QC SERIES User Manual

5.2 PTZ CONTROL AND SETUP

The following instructions are based on the Pelco-D protocol. You will need to have the
manual for your PTZ camera at hand to ensure the proper settings within the DVR.

SETUP

For ease of set-up, the PTZ camera's video feed should be displayed on the screen.
STEP 1. Open the Pan/Tilt/Zoom
Menu from the Settings menu. You
cannot use the Shortcut Menu to
access the PTZ controls until after
you have configured a channel to use
PTZ.
STEP 2. Be certain that the channel
listed at the top is the one which
the PTZ camera will be connected
to. Enter data into the other fields
according to the data provided in
your PTZ camera's manual, including
protocol, data bits, stop bits and
parity.
STEP 3. Click the save button once you
have entered the settings. If you are
operating an identical PTZ camera
on another channel, you may use the
Copy and Paste buttons to apply
those settings to the channel that
camera is connected to. Be sure to
check that the camera's address did
not change as well.
STEP 4. Once you have saved your
settings and exited the menu, you
can right-click the mouse to bring up
the Shortcut Menu allowing you to
select the Pan/Tilt/Zoom controls.
68
PICTURE 5-2
PICTURE 5-3
PICTURE 5-4

CONTROL

Selecting the Pan/Tilt/Zoom shortcut will open the Pan/Tilt/Zoom controls window
Speed – From 1 to 8
and adjust zoom, focus and iris
Using the mouse, you can control the
direction of the camera's movements by
clicking on the arrows.
Intelligent Positioning Key - If your protocol supports it, clicking and dragging in the blue
button in the center will allow you to move the camera faster – between 4 to 16x
speed.

SETTING PRESET/PATROL/PATTERN/SCAN

Clicking the Set button in the PTZ Control Panel
addition to leaving the PTZ Control Panel active.
This window allows you to set up the PTZ's
Preset, Tour, Pattern and Border functions.
PICTURE 5-5
PICTURE 5-6
(Picture 5-5) opens a new window in
PICTURE 5-7
69