Introduction; For Your Safety - Q-See QT SERIES User Manual
Hide thumbs
Also See for QT SERIES:
- User manual (89 pages) ,
- Remote monitoring setup manual (78 pages) ,
- Manual (48 pages)
Table of Contents
Advertisement
6
94
INTRODUCTION
94
FOR YOUR SAFETY
96
To prevent damage to your Q-See product or injury to yourself or to others, read and
understand the following safety precautions in their entirety before installing or using this
97
equipment. Keep these safety instructions where all those who use the product will read them.
97
98
99
99
100
n
Check the unit and any accessories included in the package immediately after opening. If
items are missing or damaged, repackage and return to the point of purchase.
101
101
n
Use the proper power source. Only use the power adapter supplied with your system. Do
not use this product with a power source that applies more than the specified voltage (100-
103
240V AC).
104
Never insert anything metallic into the DVR. Inserting anything into the DVR or its case can
n
104
be a source of dangerous electric shock.
107
Do not operate in dusty areas. Avoid placing the DVR in places that are dusty.
n
114
115
Do not expose this product to rain or use near water. If this product accidentally gets wet,
n
unplug it and contact Q-See immediately.
116
Keep product surfaces clean and dry. To clean the outside case of the DVR, gently wipe
n
using a lightly dampened cloth (only use water, do not use solvents).
Do not operate this DVR without the cover securely in place. Do not attempt to do any
n
repairs to the DVR yourself. If there are unusual sounds or smells coming from the DVR,
unplug it immediately and contact Q-See technical support. Under no circumstances
should the cover be removed while the device is connected to a power source. You should
only remove the cover to install/replace the hard disk drive (See Chapter 9) or replace the
standard 3v lithium cell battery on the motherboard. These are the only user serviceable
parts. You may need to replace the battery if the internal clock resets itself after a power
outage
Handle the DVR carefully. If you accidentally drop your DVR on any hard surface, it may
n
cause a malfunction. If the DVR doesn't work properly due to physical damage, contact an
authorized dealer for repair or exchange.
Make sure there is proper air circulation around the unit. This DVR system uses a hard drive
n
for video storage which generates heat during operation. Do not block air holes located on
the bottom, top, sides and back of the DVR as they are designed to keep the system cool
while running. Install or place this product in an area where there is ample air circulation.
Provide proper ventilation. This DVR has a built-in fan that properly ventilates the system.
n
Do not cover or impede this fan.
WARNING! ELECTRIC SHOCK RISK!
CHAPTER 1
7
Hide quick links:
Advertisement
Table of Contents
