Qt526 - Q-See QT SERIES User Manual

QT526

FRONT PANEL
ITEM NAME FUNCTION
1 IR RECEIVER Receives signals from remote control
2 Select individual channels for full screen view
NUMBER BUTTONS
3 DIRECTION Selects multi-screen viewing mode
Navigates through selections in menus
4 ENTER Confirm Selection
5 INDICATOR LIGHTS Shows status of the DVR Functions and the Hard
Drive
6 MENU Opens the Main Menu
Increases the value in Setup mode
7 USB PORT Used for external USB backup devices.
8 PLAYBACK CONTROLS In addition to normal DVR playback and record
operation, the following have additional functions:
9 SEARCH/ZOOM Enter Search mode
Controls Zoom function in PTZ mode
10 INFO Displays system information
11 BACKUP Enter Backup mode
Decreases the value in Setup mode
12 AUDIO Mutes or unmutes audio
13 PTZ Enter PTZ mode
28
1 2 3 4 5
8 9 10 11 12 13
RECORD Controls Focus in PTZ mode
REVERSE Controls Speed in PTZ mode
STOP/ESC Exits current interface or status
Also switches video output mode.
BACK PANEL
6 7 2
1
11 12
ITEM NAME
1
PTZ
2 K/B
3
ALARM IN
4 NET
5 VGA PORT
6 VIDEO OUT
7 VIDEO IN
8 AUDIO IN
9 AUDIO OUT
10 POWER
11
+5V and GND
12 ALARM OUT
13 USB PORT
14 SPOT OUT
15
DC IN
16 FAN
3 4 5 6 7
13 14
FUNCTION
Connections for Pan-Tilt-Zoom speed dome cameras.
Y = "+" Z = "-"
Connector for a PTZ keyboard
Connections for up to 16 external sensors
Network (ethernet) port
VGA output for 19" or larger monitor
BNC connector for TV or monitor
BNC connectors for up to 16 cameras
4 channels of audio input
Audio output for amplified speaker
Power On/Off
+5V and grounding
1 Channel relay output for external alarm
For the USB mouse
Connect to another monitor as an auxiliary output
channel. This monitor will only display video and will
have no menu access.
Power input for 12V DC power supply
Cooling fan exhaust port. This should not be blocked.
8 9 10
15 16
29