Section 4: Adjusting Print Offsets; Front Of Printer; Feed Direction - Primera CX1200 Pre?Die Cut Upgrade Instructions

Section 4: Adjusting Print Offsets
Use the following table to diagnose print
offset problems. Before adjusting any
offsets make sure you have entered the
correct label size, vertical spacing, and
horizontal spacing in the PTPrint label
setup wizard. Offsets can be adjusted on
the options tab of the status monitor.
Only vertical offsets can be adjusted while
the printer is printing!
Front of Printer
8
Feed Direction
Problem:
Image is offset to the left or Right.
Solution:
Adjust Vertical Offset. Measure the offset amount
accounting for the bleed. Adjust in the direction
indicated using the offset adjustments on the
options tab of the Status Monitor.
Cut (Black Line)
Printed Image with
bleed (Gray Area)
+ ‐