Remote Control Model Mbr3420/3430; Choosing Operating Mode - Zenith SYSTEM 3 Series Operating Manual & Warranty

REMOTE CONTROL MODEL MBR3420/MBR3430
INTRODUCTION
The multi-brand remote control supplied with your new
Zenith TV allows you to operate most models of infra-red
(IR) remote-controlled TVs, VCRs, and cable-TV
decoders, even if they are all different brands.
Your multi-brand remote has already been programmed to
operate your Zenith TV, a Zenith cable-TV decoder and a
Zenith VHS VCR. It must be programmed to operate other
brands of equipment.
Refer to the "Programming Brand Codes" paragraph for
more information.
CHOOSING OPERATING MODE
To use the remote to operate your TV, a cable-TV decoder
or a VCR, you must first choose the mode of operation of
the remote control. To select the mode of operation, press
MODE repeatedly until the corresponding indicator lights.
Some controls on the remote will always operate a par-
ticular appliance. For example, VOLUME always operates
the TV and PLAY always operates the VCR. The functions
of some controls depends on the selected operating mode
of the remote.
Functional Differences Between Models
MBR3420 Buttons MBR3430 Buttons
A PIP
B FREEZE
MEMORY SWAP
Point toward unit
to be controlled
Operating MODE button
and indicators
Menu operations on TV
and some VCRs
Numbered buttons for
channel selection and
other uses
LEARN button for user
programmed brand codes
NOTE: See following pages
for operating instructions.
SELECT QUIT
®®®
®®®
®®®
@ ( E,,E, )
LEARN PIP FREEZE
SWAP TIMER
RECORD STOP PAUSE
REW PLAY F FWD
OFF ON
O
F1.AN-t_
N
CHANNEL
N]
VOLUME
CD
C_D
SEARCH
CZD
I'V/_R
L
MBR3430 is Shown
Controlled device OFF/ON
Spec!al features on TV and
some VCRs
CHANNEL Up/Down for TVs,
VCRs and cable
VOLUME Up/Down for TV
Special features on some.
TVs and some VCRs
2743-0 4 -- 1