Zenith SENTRY 2 SLS2555S5 Operating Manual And Warranty page 29

MAINTENANCE AND TROUBLESHOOTING
VCR MODE CHART 2. OUTPUT TO TV FROM AUDIO/VIDEO JACKS ON VCR
(_ START
VCR POWER
IS OFF
t
The operating mode of your VCR determlncs what type of
program source is provided, and whether the audio is stereo
or monaural Use this flow chart to determine the operating
status of your VCR, so that you know when to select the VCR
(orauxil_) sourceonyourTV.
Use the LEFF and RIGHT AUDIO output jacks on the
VCR to get stereo sound. Select STEREO audio mode of
operation for the "IV by using the options on the AUDIO
Menu of the TV. You must use the VIDEO output when
the LEFT and RIGHT AUDIO outputs are used.
VCR POWER
IS ON
NO OUTPUT IS
PROVIDED AT THE
AUDIO AND VIDEO
OUTPUT JACKS
@@©
VIDEO R L
OUT AUDIO
[
OUT
StereoVCRoutput to lV
NO YES
VCR TUNER
SELECTS
CHANNELS TO
BE SEEN ON TV
VIDEO TAPE
PROVIDES
PROGRAM TO
BE SEEN ON TV
1. 13/channel or tape playback is provided at the video
output Jack.
2. Stereo audio Is provided at the audio output jacks If
stereo Is present on the channel being received or on
the tape being played.
©
VIDEO
OUT
I
©@
R L
AUDIO
OUT I
Stereo VCR output to TV
VCRMO0_ 12 -- 4