Stereo Audio Connection To Audio Amplifier - Zenith SENTRY 2 SLS2555S5 Operating Manual And Warranty

Sentry 2 serues mts stereo color tv with remote control and closed captions
Table of Contents

Advertisement

CONNECTIONS
FOR YOUR TV
STEREO AUDIO
CONNECTION
TO AUDIO AMPLIFIER
Using an External Amplifier with Speakers While the TV's
Speakers are OFF
1. Make the connections
to the external
amplifier
as
shown in the diagram
below.
2. Place the SPEAKER
EXT/INT
switch on the TV in
the INT position
(TV's speakers
are ON).
3. Turn the TV ON. Increase
the volume level of the
TV until the sound just starts to distort (sound bad).
4. Place the SPEAKER
EXT/INT
switch on the TV in
the EXT position
(TV's speakers
are OFF).
5. Turn the external
audio amplifier
ON. Adjust the
volume level of the audio amplifier
for the highest
level you will need for your listening
pleasure.
6. Adjust the volume
level of the TV for the normal
listening level as heard through
the speakers of your
audio amplifier.
7. You can now use the VOL (VOLUME)
control
on
the TV or on the remote
control
to adjust
the
volume of the speakers
of your audio amplifier.
Using an ExternalAmplifier with Speakers While the TV's
Speakers are ON
1. Make the connections to the external amplifier as
shown in the diagram below.
2. Place the SPEAKER EXT/INT switch on the TV in
the INT position (TV's speakers are ON).
3. Turn the TV ON. Increase the volume level of the
TV until the sound just starts to distort (sound bad).
4. Turn the external audio amplifier ON. Adjust the
volume level of the audio amplifier for the highest
level you will need for your listening pleasure.
5. Adjust the volume level of the TV for the normal
listening level as heard through the speakers of the
TV.
6. You can now use the VOL (VOLUME) control on
the TV or on the remote control to adjust the
volume of both the TV's speakers and the audio
amplifier's speakers.
NOTE: If the volumeof the internalTV speakers is set too
low, you mayhear undesirablenoises through the speakers
connected to your audio amplifier.
PANEL ON BACK OF
STEREO AMPLIFIER
/_ux INPUr
SPi(R OUTPUT
L
R
o0
,TOISI_RS
Q
VHF-UHF/CABLE
LEFT
©
VARIABLE AUDIO
OUTPUT
EXT[--BINT
_EAK_
AUX INPUT
VIDEO
AUDIO
©©©
RIGHT LEFT
Connection Center on Bock of TV
2_4-c
11 -- 3

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sentry 2 sls2553s5Sentry 2 sls8553y5Sentry 2 sls7553s5

Table of Contents