Preparation For Use; Installing Batteries - Zenith SENTRY 2 SLS2555S5 Operating Manual And Warranty

GETTING TO KNOW YOUR REMOTE CONTROL
MODEL SC3390
PREPARATION FOR USE
Batteries are provided with this remote, but you must install
them before using the remote.
INSTALLING BATTERIES
When the effective operating range of your remote becomes
noticeably shorter, replace the batteries with two (2) high
quality,
alkaline, size AAA batteries.
1.Remove the battery compartment cover, PUSH
DOWN tab and PULL OUT from top.
2. Insert new batteries as indicated in the diagram
inside the compartment.
3. Replace the cover by inserting the tab on the bottom
of the cover into its housing. Snap the cover into
position.
NOTES:
• Be careful not to place heavy objects on top of the remote
control buttons. Prolonged accidental operation of the
remote control will shorten battery life.
• If you do not use the remote control for a month or more,
remove the batteries. Battery leakage can cause damage
to the remote control.
• Zenith is not responsible for damage caused by such
battery leakage.
lm 1
_s0_ 4 -- 2