Auto Program; Ch. (Channel) Add/Del; Clock Set; Timer Setup - Zenith SENTRY 2 SR2765 Operating Manual & Warranty

THE FIRST TIME YOU OPERATE YOUR "i'V
STEP 3. USE AUTO PROGRAM
When your TV is first powered up, AUTO PROGRAM will
be selected in the Setup Menu. AUTO PROGRAM finds all
available channels and stores them in the memory of the TV.
To start the AUTO PROGRAM procedure, press AD-
JUST Left/Right. Follow the instructions on the TV.
SETUP MENU
'->" AUTO PROGRAM
CH. ADD/DEL
CH. LABELS
CLOCK SET
TIMER SETUP
PAR. CONTROl..
CAPTION/TEXT
LANGUAGE
START
Setup Menu with Auto Program Highlighted
F
PRESST$ TO CHANGE INPUTSELECTION
OFF AIRANTENNA
I CABLE TVINPUTI
PRESS <- _ TO BEGINSEARCH
Press 1",1, t o select either OFF
AIR ANTENNA or CABLE TV.
SEARCHING CABLETV INPUT
CHANNEL____ IS (NOT)FOUND
Press <-- -_ to begin
channel search.
__..........__
AUTO PROGRAM H AS COMPLETI'D
.... CHANNELS FOUND
J
Press ENTER after channel[
search is completed.
STEP 4. SET THE CLOCK
1. Press MENU repeatedly until the SETUP MENU is
shown
2. Press SELECT to highlight CLOCK SET.
3. Use numbered buttons on remote control to enter
correct time and the TIMER button to select AM or
PM. You can also use ADJUST Left/Right to ad-
vance the 24 hour clock.
,i. Press ENTER to start the clock and remove the
menu.
NOTE:
,' The clock must be set before the TIMER SETUP menu
will appear.
;STEP 5: USE OTHER OPTIONS
You may want to use the following options:
•, Delete undesirable channels or add additional channels: Refer
to the CH. (Channel) ADD/DEL option for details.
• Label channels (such as ABC) that appear in the Channel/
Time display: Refer to the CH. (Channel) LABELS option
for details.
Use the Parental Control feature to block the viewing of
undesirable channels: Refer to the PAR. CONTROL op-
tion for details.
SETUP MENU
AUTO PROGRAM
CH. ADD/DEL
CH. LABELS
-'> CLOCK SET
TIMER SETUP
PAR. CONTROL
CAPTION/TEXT
LANGUAGE
10:30 AIV[
Setup Menu with Clock Set Highlighted
2,_14-o 2 -- 2