Table of Contents
Advertisement
AUDIO MENU
i.q =l ,..s
TREBLE
BALANCE
AUDIO
RLIrllrlJ SEQ
SURROUND
BASS
TREBLE
BALANCE
AUDIO
(AUDIO mode options
are notavailable
while
using a VIDEO or
S-VIDEO source. The
audio received from
these sources are
assumed to be stereo .)
SEQ
(Spatial Equalization)
SURROUND
Adjusts the BASS (low-frequency) level.
Adjusts the TREBLE (high-frequency) level.
Adjusts the balance of sound between the left and right speakers for stereo programs.
Allows you to select STEREO, MONO or 2ND AUDIO/SAP speaker operation.
STEREO:
Directs the sound to the left and right speakers as supplied by the program
source (broadcast TV, VCR, etc.)
MONO:
Directs the same sound to both left and right speakers even if the source being
received is in stereo.
2ND AUDIO/SAP:
Directs the sound for the Second Audio Program to both the left and right
speakers. SAP sound is always monaural. If the SAP signal ends, the audio
defaults to either stereo or mono depending on the audio being received.
Improves tonal balance and increases apparent stereo separation to produce a spacious and more tonal
sound. SEQ is only available ifa stereo signal is being received and STEREO is either selected using
the AUDIO option or selected by default.
Adjusts the level of Surround Sound provided to the optional surround sound speakers. Surround
Sound is only available ifa surround encoded stereo signal is being received and STEREO is either
selected using the AUDIO option or selected by default.
To Access AUDIO MENU
Refer to the "Quick Reference to On-Screen Menus" section
for details.
NOTE:
All adjustments on the AUDIO MENU are optional.
You do not have to use these features in order to use your TV.
Audio Mode Shown
in
Channel/Time
Display
STEREO is selected and a stereo
signal is being received. You will
hear stereo sound.
To Adjust BASS, TREBLE, BALANCE and SURROUND
Press ADJUST (ADJ) LeflJRight until the most pleasing
sound is heard.
To Use AUDIO Mode Options
Press ADJUST (ADJ) Left/Right to select desired option.
We recommend that you use the STEREO option. The TV
will switch automatically between the STEREO and MONO
modes dependent on the signal being received.
If you prefer SAP, use the 2ND AUDIO/SAP
option. On those
stations which broadcast two audio portions, you will hear the
SAP (usually a second language). When the SAP broadcast
ends, the TV switches automatically between STEREO and
MONO modes. The TV switches back to 2ND AUDIO/SAP
when the SAP broadcast resumes.
2_3_-o
8 -- I
Advertisement
Table of Contents
