Zenith VRC4165 Operating Manual And Warranty page 15

REMOTE CONTROL
• /
C--- Feature not used.
ADJ (ADJUST Left/Right)-
Use: to modify on-screen menu
options and to adjust tape play-
back tracking.
MBR3370--02 KEY DESCPdP't' ONS
CC/QUIT-- Use to exit any on-
screen menu and to access
Closed Captions (CaptionVision)
or Text options if available on
TV.
CH MAP-- Press to begin
VCR Plus Recording Setup.
CHANNEL (Up/Down)-- Use
to change channels one at-a-time.
ENTERm Use for program-
ming on-screen menus. Press
chzxmel number(s) then ENTER
for direct channel entr3,.
F FWD (Fast Forward)-- Use
to advance tape rapidly.
MEMORY-- Use to zero Real-
Time tape counter or return tape
to M 0:00:00 position.
MEN-U-- Press to display on-
screen menu options.
FL,ASHBK (Flashback)-- Use
duFing tape playback to return to
previous VCR channel.
MODE-- Mode selector.
MUTE-- Press to turn off
sound, press again to restore.
Numbered keys_ Use to
choose channels and enter pro-
gramming information. Press
channel number(s), then ENTER
for direct channel entry.
PAUSE_ Use to pause tape
playback or record.
PLAY-- Use to begin tape play-
back.
POWER--Turns VCR on and
off. Turns VCR Timer On and
Off.
PRG---- Press to begin Remote
control Brand Code program-
ming.
RECORD--. Use to access re-
cord feature.
REIVEN"D_ Use to rewind tape
rapidly.
SEARCH-- Use to access re-
cording start locations.
SELECT (Up/Down)--Use to
choose on-screen menu options.
STOP_ Use to cancel VCR
functions, like tape playback or
record modes.
TV VCR CATV_ Mode indica-
tor lights.
TV/VCR SOURCE-- Use to
switch TV picture from VCR
tuner or playback to TV tuner.
VCR PLUS_ Press to begin
VCR Plus Recording procedure.
VOLUME--Use to increase/de-
crease sound level.
On-Screen and Remote Control Arrows
/.
On Remote
\
_, to select • l, to adjust
To exit press 'QUIT'
t I SEt.
On VCR
Note: Where arrows appear within on-screen
menus, use the keys shown to Select and Adjust options.