General Specifications - Fluke 1652C User Manual

General Specifications

Specification
Size
Weight (with batteries)
Battery size, quantity
Battery type
Battery life (typical)
Fuse
Operating Temperature
Storage Temperature
Relative Humidity
Operating Altitude
Shock, Vibration
Sealing
EMC
Safety
Pollution Degree
Maximum voltage between any
terminal and earth ground
Surge Protection
10 cm (L) x 25 cm (W) x 12.5 cm (H)
1.3 kg
Type AA, 6 ea.
Alkaline supplied.
Usable with 1.2 V NiCd or NiMH batteries (not supplied)
200 hours idling
T3.15 A, 500 V, 1.5 kA 6.3 x 32 mm (PN 2030852)
-10 C to 40 C
-10 C to 60 C indefinitely (to -40 C for 100 hrs)
80 % 10 to 35 C; 70 % 35 to 40 C
0 to 2000 meters
Vibration to Class 3 per Mil-Prf-28800F
1 meter drop test, six sides, oak floor
IP 40
Complies with EN61326-1: 2006
Complies with EN61010-1 Ed 2.0 (2001-02), UL61010,
ANSI/ISA –s82.02.01 2000 and CAN/CSA c22.2
nd
No.1010 2 edition
Overvoltage Category: 500 V/CAT III
Measurement Category III is for measurements
performed in the building installation. Examples are
distribution panels, circuit breakers, wiring and cabling.
Category IV equipment is designed to protect against
transients from the primary supply level, such as an
electrical meter or an overhead or underground utility
service.
Performance EN61557-1, EN61557-2, EN61557-3,
EN61557-4, EN61557-5, EN61557-6, EN61557-7
Second edition. EN61557-10 First edition.
2
500 V
6 kV peak per EN 61010-1 Ed. 2.0 (2001-02)
Electrical Installation Tester
Specifications
Characteristic
300 V/CAT IV
45