Uploading Test Results - Fluke 1652C User Manual

1652C/1653B/1654B
Users Manual

Uploading Test Results

(Model 1653B and 1654B Only)
IR Port
To upload test results:
1. Connect the IR serial cable to the serial port on the PC.
2. Attach the IR adapter and the device to the tester as shown in Figure 23.
Be sure to align the IR adapter to the IR port on the tester.
The IR data port is disabled when test leads are plugged in.
Disconnect test leads before attempting to upload test results.
3. Start the Fluke PC software program.
4. Press  to turn on the tester.
5. Refer to the software documentation for complete instructions on how to
set the date/time stamp and upload data from the tester.
40
IR Adapter
Figure 23. Attaching the IR Adapter
Note
IR Device
apx031f.eps