What Happens In Each Cycle - Whirlpool LLR8233BN0 Use And Care Manual

What happens in each cycle
Permanent Press cycle
Fill to selected load size
When the cycle Control Knob is set to a
number and pulled out. the washer fills to the
selected load size with the selected water
temperature before agitation and timing start.
The washer will begin agitating immediately
after filling; agitation can occur with the washer
lid up or down. After agitation starts, the knob {2r_.,_ Wash selected time
turns clockwise until it points to OFF and the _J
cycle ends,
The washer pauses briefly throughout l Jm=-I
each cycle. These pauses are normal for Partial drain-No agitation
washer operation. _
NOTE: A Gentle Wash system helps protect _ Fill to selected load size
your fabrics by reducing wash agitation speed _
during the last few minutes of wash agitation in
the Regular and Permanent Press cycles. _T_ Brief agitation
Regular and Delicate cycles _ -qF
Fill tOselected load size t-_-I
Drain-No agitation
Wash selected time Spin
_ Drain-No agitation _ Fill
Spin Rinse
Fill _ Drain-No agitation
___ Rinse _ Spin-Spray rinse
_ Drain-No agitation _ Spin
Spin-Spray rinse
V
Spin
9