Using Drain And Spin; What Happens In Each Cycle - Whirlpool 4LBR7255AQ1 Use And Care Manual

Using drain and spin

NOTE: If your model has the Extra Rinse
option, move your selector to OFF.
A drain and spin may help shorten drying times
for some heavy fabrics or special-care items
by removing excess water.
1. Push Cycle Control Knob in and turn
clockwise to SPIN, as illustrated.
2. Pull Cycle Control Knob out. The washer
will drain and spin.

What happens in each cycle

When the Cycle Control Knob is set to a
number and pulled out, the washer fills (to the
selected load size) before agitation and timing
start. The washer will begin agitating immedi-
ately after filling; agitation can occur with the
washer lid up or down. After agitation starts,
the Cycle Control Knob turns clockwise until it
O
points to (OFF) and the cycle ends.
WASH
Wash selected time
Drain (or partial drain
No agitation
† The Permanent Press cycle partially
drains, fills, agitates briefly, and drains.
Fill
† )
Spin
O P E RA T IN G Y O U R WA S H ER
S
S pin
Regular
Super Wash O
The washer pauses briefly throughout each
cycle. These pauses are normal for washer
operation.
NOTE: A Gentle Wash system helps protect
your fabrics by reducing wash agitation speed
during the last few minutes of wash agitation in
the Regular and Permanent Press cycles.
RINSE
Drain-No agitation
Spin-Spray rinse
Permanent Press
pin
O
Spin
S pin
O
Fill
Rinse
Spin
Off
9