Table Of Contents; Before Starting Your Washer; Starting Or Stopping Your Washer; Selecting A Load Size - Whirlpool LLR8233BN0 Use And Care Manual

Operating Your Washer
In This Section
Page
Before starting your washer .............................. 5
Starting or stopping your washer ..................... 5
Selecting a load size .......................................... 5
Selecting wash-rinse temperatures ................. 6
Page
Selecting a cycle and time .............................. 6
Using rinse and spin ....................................... 8
Using drain and spin ....................................... 8
What happens in each cycle ........................... 9
Operating your washer properly assures maximum washing efficiency. This section gives you
important information to help you to select a cycle, time, and temperature for your wash load.
Before starting your washer
Add measured detergent. Then place a sorted NOTE: If your washer has a Consumer Buy
load in the washer before starting. See page 12 Guide, remove it and place it in your Use and
for additional "Before you wash" information. Care Guide.
Starting or stopping your washer
Starting your washer:
1. Push in the Cycle Control Knob and turn it
clockwise. Stop when the indicator on the
knob's outer ring points to the number in the
wash cycle you want, The numbers are
minutes of wash time. Make other selec-
tions, if necessary,
2. Pull out the Cycle Control Knob.
Refer to pages 6-g for additional information to
help you make selections.
Stopping and restarting your washer:
• To stop the washer at any time, push in the
Cycle Control Knob
• To restart the washer, close the lid (if neces-
sary) and pull out the Cycle Control Knob.
Selecting a load size
Your washer has a knob or slide Load Size
Selector. Position the Load Size Selector at the
setting that corresponds to the size load you
want to wash.
Select a load size based upon the size of the
load and the fabric you are washing. See page
12 for additional loading information,
• If your washer has a knob Load Size Selec-
tor, turn selectorto the desired load size.
Settings may vary with model