Table of Contents
Advertisement
Available languages
Available languages
INSTALLATION REQUIREMENTS
Gather the required tools and parts before starting installation.
Read and follow the instructions provided with any tools listed
here.
Tools Required
Phillips screwdriver
•
Level
9/16"(14 mm) open-end
•
Measuring tape
wrench (for leveling leg
Iocknuts)
Parts Supplied:
•
Console
•
Screws (2)
•
Brackets (2)
A
B
A. Console
B. Bracket
Your laundry tower can be installed freestanding or between your
washer and dryer. Proper installation is your responsibility.
Installation
Clearances
•
The location must be large enough to allow the drawers to be
fully opened.
•
When installing your laundry tower between or next to your
washer and dryer, a spacing of 1" (2.5 cm) on the sides of the
laundry tower is recommended
to reduce noise transfer.
•
Additional spacing should be considered for ease of
installation and servicing.
Laundry Tower Dimensions
(103,8
cm)
36"*
(91,4 cm)
43 1/2"
(110,4 cm)
25 3/4 ....
(65.4 cm)
*Includes leveling feet
**Includes drawer front
131/2"
_(34,3
crn)
\
INSTALLATION INSTRUCTIONS
The console is an optional feature of your laundry tower. It allows
2.
you to match the style of your laundry tower to that of a top-
loading washer, and it provides additional storage space.
Excessive
Weight Hazard
Use two or more people to move and install
laundry
tower.
Failure to do so can result in back or other injury.
1. Using two or more people, situate the laundry tower near its
final location. Open the drawers to remove any contents
stored inside.
Using a Phillips screwdriver, remove the 2 outside screws
from the back of the laundry tower top panel and discard
them.
--/
(
®
A. Outside screws
Advertisement
Table of Contents
