Table of Contents
Advertisement
Available languages
Available languages
LAUNDRY TOWER SAFETY
Your safety and the safety of others are very important.
We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety
messages.
This is the safety alert symbol.
This symbol alerts you to potential hazards that can kill or hurt you and others.
All safety messages will follow the safety alert symbol and either the word "DANGER" or "WARNING."
These words mean:
You can be killed or seriously injured if you don't immediately
follow
instructions.
You can be killed or seriously injured if you don't follow
instructions.
All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can
happen if the instructions are not followed.
INSTALLATION REQUIREMENTS
Laundry Tower Dimensions
Gather the required tools and parts before starting installation.
Read and follow the instructions
provided with any tools listed
here.
Tools Required
•
%6" (14 mm) open-end
•
Measuring tape
wrench (for leveling leg
Iocknuts)
•
Level
381/8 "*
(96.8
cm)
i d ¸¸ _'
_
'_/
Your laundry tower can be installed freestanding
or between your
washer and dryer. Proper installation is your responsibility.
Installation
Clearances
•
The location must be large enough to allow the drawers to be
fully opened.
When you are installing your laundry tower between or next to
your washer and dryer, a spacing of 1" (2.5 cm) on the sides
of the laundry tower is recommended
to reduce noise
transfer.
•
Additional spacing should be considered for ease of
installation and servicing.
_
27 5/s ....
(70,1 cm)
45 s/_6"
(115.1 cm)
%
*Includes leveling feet
**Includes drawer front
Advertisement
Table of Contents
