Download
Share
Print this page
Fantasea Nano LED Pro Set Operator's Manual
  1. Manuals
  2. Brands
  3. Fantasea Manuals
  4. Camera Accessories
  5. Nano LED Pro Set
  6. Operator's manual

Fantasea Nano LED Pro Set Operator's Manual

Hide thumbs

Advertisement

Quick Links

Download this manual
1

Advertisement

loading

Related Manuals for Fantasea Nano LED Pro Set

Summary of Contents for Fantasea Nano LED Pro Set

  • Page 2: Table Of Contents

    Table of Contents 1. Introduction ......................3 2. Installing and Removing Batteries ............. 4 3. Turning the Nano LED Pro On/Off .............. 5 4. Assembling the Cone and Multi-Colored Plastic Disks ....... 6 5. Using the Nano LED Pro as a Signaling Device........6 6.

  • Page 3: Introduction

    1. Introduction The Nano LED Pro is a compact and powerful multi-purpose LED light system. The Nano LED Pro Set was uniquely designed to be used as a: • Powerful diving torch • Focus light for underwater photography • Signaling light for above and below water, perfect for diver or vessel identification This set combines a compact, powerful multi-use diving torch and focus light with a new application, similar to the old "Chemical Stick...

  • Page 4: Installing And Removing Batteries

    2. Installing and Removing Batteries A. Prior to installing batteries, the white cone should be removed. Simply detach the cone from the flashlight’s head by gently pulling them away from each other. Make sure that when separating the cone from the flashlight, there is no tension exerted on the cone’s lanyard, which is wrapped around the flashlight.

  • Page 5: Turning The Nano Led Pro On/Off

    G. It is recommended to occasionally apply a slight amount of silicone grease to the black O-ring seal found on the flashlight after unscrewing the flashlight head counterclockwise. H. In order to attach the cone to the flashlight again, simply cover the flashlight’s head with the open side of the cone, so it wraps around it.

  • Page 6: Assembling The Cone And Multi-Colored Plastic Disks

    4. Assembling the Cone and Multi-Colored Plastic Disks A. Detach the cone from the flashlight’s head by gently pulling them away from each other. Make sure that when separating the cone from the flashlight, there is no tension exerted on the cone’s lanyard, which is wrapped around the flashlight.

  • Page 7: Using The Nano Led Pro As A Back-Up Light

    C. Leave as little slack as possible to the hand lanyard, so the light is tied to the tank valve as closely as possible. D. Since the cone consists of positive buoyancy, the Nano LED Pro will be pointing up during the dive. E.

  • Page 8: Specifications

    You must carefully soak and rinse exterior components in fresh water after each use. • Store in a protected, dry and shaded area. • Remove batteries when storing for an extended period of time. For further information please contact us at info@fantasea.com visit our website at www.fantasea.com...