Fantasea Nano Spotter Operator's Manual

Fantasea Nano Spotter Operator's Manual

Advertisement

Quick Links

1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Nano Spotter and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Fantasea Nano Spotter

  • Page 2: Table Of Contents

    Table of Contents 1. Introduction ......................3 2. Installing and Removing Batteries ............. 3 3. Turning the Nano Spotter On/Off ............... 5 4. Assembling the Cone and Multi-Colored Plastic Disks ....... 5 5. Using the Nano Spotter as a Signaling Device........6 6.
  • Page 3: Introduction

    1. Introduction The Nano Spotter is a new LED light from Fantasea, similar to the old "Chemical Stick Lights", but reusable and much more environmentally friendly. It is a perfect light for signaling and messaging during night dives. Included in the kit are the Nano Spotter light, hand lanyard, white plastic cone with a lanyard and 4 color disks.
  • Page 4 B. To open the Nano Spotter, hold the hand grip firmly in one hand and turn the flashlight head counterclockwise until it separates. Pull the flashlight head off. Please make sure that the light is pointed in an upward position so contents do not fall out when opened.
  • Page 5: Turning The Nano Spotter On/Off

    on the rubber light cover, but it should be attached firmly to assure that it is watertight and does not allow water to seep into the cone. The cone is what gives the necessary buoyancy to the Nano Spotter. 3. Turning the Nano Spotter On/Off A.
  • Page 6: Using The Nano Spotter As A Signaling Device

    B. Choose one of the colorful plastic disks included with the kit. C. Push the chosen plastic disk into the white plastic cone, until it is positioned inside the dedicated track. Note that the shiny side of the disk should be positioned towards the bottom open part of the cone.
  • Page 7: Using The Nano Spotter As A Back-Up Light

    E. After the dive, detach the Nano Spotter from the tank valve and soak and rinse exterior components in fresh water. 6. Using the Nano Spotter as a Back-up Light A. The Nano Spotter can also be used as a back-up light during night dives.
  • Page 8: Specifications

    You must carefully soak and rinse exterior components in fresh water after each use. • Store in a protected, dry and shaded area. • Remove batteries when storing for an extended period of time. For further information please contact us at info@fantasea.com visit our website at www.fantasea.com...

Table of Contents